Werkzeug für unterwegs: Unterschied zwischen den Versionen
Aus T4Forums Doku
Zur Navigation springenZur Suche springen
B.Rude (Diskussion | Beiträge) |
B.Rude (Diskussion | Beiträge) |
||
| (28 dazwischenliegende Versionen desselben Benutzers werden nicht angezeigt) | |||
| Zeile 25: | Zeile 25: | ||
==== Rad, Reifen ==== | |||
<table border="1" cellspacing="2" cellpadding="4"> | <table border="1" cellspacing="2" cellpadding="4"> | ||
| Zeile 43: | Zeile 44: | ||
==== Ring-Maulschlüssel ==== | |||
<table border="1" cellspacing="2" cellpadding="4"> | <table border="1" cellspacing="2" cellpadding="4"> | ||
| Zeile 93: | Zeile 94: | ||
==== Gabelschlüssel ==== | |||
<table border="1" cellspacing="2" cellpadding="4"> | <table border="1" cellspacing="2" cellpadding="4"> | ||
| Zeile 107: | Zeile 108: | ||
==== Schraubendreher ==== | |||
<table border="1" cellspacing="2" cellpadding="4"> | <table border="1" cellspacing="2" cellpadding="4"> | ||
| Zeile 137: | Zeile 138: | ||
==== Zangen ==== | |||
<table border="1" cellspacing="2" cellpadding="4"> | <table border="1" cellspacing="2" cellpadding="4"> | ||
| Zeile 153: | Zeile 154: | ||
</tr> | </tr> | ||
<tr> | <tr> | ||
<td align="left"> | <td align="left">Wasserpumpenzange</td> | ||
<td align="left">Knipex Cobra 87 02 250</td> | <td align="left">Knipex Cobra 87 02 250</td> | ||
</tr> | </tr> | ||
| Zeile 162: | Zeile 163: | ||
</table> | </table> | ||
==== Elektrik: ==== | |||
<table border="1" cellspacing="2" cellpadding="4"> | <table border="1" cellspacing="2" cellpadding="4"> | ||
| Zeile 192: | Zeile 192: | ||
</table> | </table> | ||
==== Innensechskant ==== | |||
<table border="1" cellspacing="2" cellpadding="4"> | <table border="1" cellspacing="2" cellpadding="4"> | ||
| Zeile 219: | Zeile 219: | ||
oder als Satz wie GEDORE Winkelschraubendreher Satz H 42 KEL-88 ) | oder als Satz wie GEDORE Winkelschraubendreher Satz H 42 KEL-88 ) | ||
==== Innenvielzahn ==== | |||
<table border="1" cellspacing="2" cellpadding="4"> | <table border="1" cellspacing="2" cellpadding="4"> | ||
| Zeile 241: | Zeile 241: | ||
==== T-Griff Steckschlüssel ==== | |||
<table border="1" cellspacing="2" cellpadding="4"> | <table border="1" cellspacing="2" cellpadding="4"> | ||
| Zeile 258: | Zeile 258: | ||
</table> | </table> | ||
==== Sonstiges ==== | |||
<table border="1" cellspacing="2" cellpadding="4"> | <table border="1" cellspacing="2" cellpadding="4"> | ||
| Zeile 271: | Zeile 271: | ||
</table> | </table> | ||
==== Ersatzteile/Kleinteile ==== | |||
<table border="1" cellspacing="2" cellpadding="4"> | |||
<tr> | |||
<td width="300" align="left">Bezeichnung</td> | |||
<td width="500" align="left">Komentar</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Sicherungen</td> | |||
<td align="left">Sicherungskasten mit Flachsicherungen</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Lampensatz</td> | |||
<td align="left">H1, H4, H7 je nach verbauter Lampe</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Lüsterklemmen</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">Universal Schlauchschellen</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">Unterdruckschlauch 3 mm</td> | |||
<td align="left">3 Meter</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Sekundenkleber</td> | |||
<td align="left">Geel</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Einwegfeuerzeug</td> | |||
<td align="left"> </td> | |||
</tr> | |||
</table> | |||
=== Werkzeugsatz Enhanced === | |||
z.B. Offroad Tour, langer Campingurlaub | |||
'''Rad, Reifen''' | |||
<table border="1" cellspacing="2" cellpadding="4"> | |||
<tr> | |||
<td width="300" align="left">Bezeichnung</td> | |||
<td width="500" align="left">Referenz</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Gelenk-Drehgriff 1/2 Zoll</td> | |||
<td align="left">Famex 10672 Spezial Gelenk-Drehgriff extra lang</td> | |||
</tr> | |||
<tr> | |||
<td align="left">19er 1/2 Zoll Nuss lang</td> | |||
<td align="left">KS Tools 515.1115, Hazet 19er Schlagschrauber Nuss für Alufelgen</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Montierhebel</td> | |||
<td align="left"> </td> | |||
</tr> | |||
</table> | |||
==== Ring-Maulschlüssel ==== | |||
<table border="1" cellspacing="2" cellpadding="4"> | |||
<tr> | |||
<td width="300" align="left">Bezeichnung</td> | |||
<td width="500" align="left">Referenz</td> | |||
</tr> | |||
<tr> | |||
<td align="left">7 mm gerade</td> | |||
<td align="left">Hazet 600N-7</td> | |||
</tr> | |||
<tr> | |||
<td align="left">8 mm gerade</td> | |||
<td align="left">Hazet 600N-8</td> | |||
</tr> | |||
<tr> | |||
<td align="left">10 mm gerade</td> | |||
<td align="left">Hazet 600N-10</td> | |||
</tr> | |||
<tr> | |||
<td align="left">13 mm gerade</td> | |||
<td align="left">Hazet 600N-13</td> | |||
</tr> | |||
<tr> | |||
<td align="left">13 mm gekröpft</td> | |||
<td align="left">Hazet 603N-13</td> | |||
</tr> | |||
<tr> | |||
<td align="left">15 mm gerade</td> | |||
<td align="left">Hazet 600N-15</td> | |||
</tr> | |||
<tr> | |||
<td align="left">16 mm gerade</td> | |||
<td align="left">Hazet 600N-16</td> | |||
</tr> | |||
<tr> | |||
<td align="left">17 mm gerade</td> | |||
<td align="left">Hazet 600N-17</td> | |||
</tr> | |||
<tr> | |||
<td align="left">18 mm gerade</td> | |||
<td align="left">Hazet 600N-18</td> | |||
</tr> | |||
<tr> | |||
<td align="left">19 mm gerade</td> | |||
<td align="left">Hazet 600N-19</td> | |||
</tr> | |||
</table> | |||
==== Gabelschlüssel ==== | |||
<table border="1" cellspacing="2" cellpadding="4"> | |||
<tr> | |||
<td width="300" align="left">Bezeichnung</td> | |||
<td width="500" align="left">Referenz</td> | |||
</tr> | |||
<tr> | |||
<td align="left">22 mm / 24 mm</td> | |||
<td align="left">GEDORE Doppelmaulschlüssel 22x24 mm DIN 3110</td> | |||
</tr> | |||
</table> | |||
==== Schraubendreher ==== | |||
<table border="1" cellspacing="2" cellpadding="4"> | |||
<tr> | |||
<td width="300" align="left">Bezeichnung</td> | |||
<td width="500" align="left">Referenz</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Kreuzschlitz kurz</td> | |||
<td align="left">Hazet 801K-PH2</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Kreuzschlitz lang</td> | |||
<td align="left">Hazet 802-PH2</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Kreuzschlitz Gr. 4</td> | |||
<td align="left">Gedore 2160SK PH 4 3K-Schraubendreher</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Schlitz klein</td> | |||
<td align="left">Hazet 810SPC 0.5 x 3.0</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Schlitz groß</td> | |||
<td align="left">Hazet 801U-55</td> | |||
</tr> | |||
</table> | |||
==== Zangen ==== | |||
<table border="1" cellspacing="2" cellpadding="4"> | |||
<tr> | |||
<td width="300" align="left">Bezeichnung</td> | |||
<td width="500" align="left">Referenz</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Kombizange</td> | |||
<td align="left">Knipex 03 02 180</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Spitzzange</td> | |||
<td align="left">Knipex 25 02 160</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Wasserpumpenzange</td> | |||
<td align="left">Knipex Cobra 87 02 250</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Seitenschneider</td> | |||
<td align="left">Knipex 70 02 180</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Kneifzange</td> | |||
<td align="left"> </td> | |||
</tr> | |||
</table> | |||
==== Elektrik ==== | |||
<table border="1" cellspacing="2" cellpadding="4"> | |||
<tr> | |||
<td width="300" align="left">Bezeichnung</td> | |||
<td width="500" align="left">Referenz</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Taschenlampe</td> | |||
<td align="left">LED Lampe</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Prüflampe</td> | |||
<td align="left">Hazet 2153 Autolicht-Prüfer</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Isolierband</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">Kabelbinder klein</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">Kabelbinder groß</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">Multimeter</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">Schrumpfschlauch</td> | |||
<td align="left"> </td> | |||
</tr> | |||
</table> | |||
==== Innensechskant ==== | |||
<table border="1" cellspacing="2" cellpadding="4"> | |||
<tr> | |||
<td width="300" align="left">Bezeichnung</td> | |||
<td width="500" align="left">Referenz</td> | |||
</tr> | |||
<tr> | |||
<td align="left">5 mm, lang</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">6 mm, lang</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">7 mm, lang</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">8 mm, lang</td> | |||
<td align="left"> </td> | |||
</tr> | |||
</table> | |||
oder als Satz wie GEDORE Winkelschraubendreher Satz H 42 KEL-88 ) | |||
==== Innenvielzahn ==== | |||
<table border="1" cellspacing="2" cellpadding="4"> | |||
<tr> | |||
<td width="300" align="left">Bezeichnung</td> | |||
<td width="500" align="left">Referenz</td> | |||
</tr> | |||
<tr> | |||
<td align="left">8 mm</td> | |||
<td align="left">Gedore Winkelschraubendreher Innenvielzahn XZN M 8</td> | |||
</tr> | |||
<tr> | |||
<td align="left">10 mm</td> | |||
<td align="left">Gedore Winkelschraubendreher Innenvielzahn XZN M 10</td> | |||
</tr> | |||
<tr> | |||
<td align="left">12 mm</td> | |||
<td align="left">Gedore Winkelschraubendreher Innenvielzahn XZN M 12</td> | |||
</tr> | |||
</table> | |||
==== T-Griff Steckschlüssel ==== | |||
<table border="1" cellspacing="2" cellpadding="4"> | |||
<tr> | |||
<td width="300" align="left">Bezeichnung</td> | |||
<td width="500" align="left">Referenze</td> | |||
</tr> | |||
<tr> | |||
<td align="left">T-Griff 6 mm</td> | |||
<td align="left">Gedore Steckschlüssel mit T-Griff 6-kant 6 mm</td> | |||
</tr> | |||
<tr> | |||
<td align="left">T-Griff 7 mm</td> | |||
<td align="left">Gedore Steckschlüssel mit T-Griff 6-kant 7 mm</td> | |||
</tr> | |||
<tr> | |||
<td align="left">T-Griff 8 mm</td> | |||
<td align="left">Gedore Steckschlüssel mit T-Griff 6-kant 8 mm</td> | |||
</tr> | |||
<tr> | |||
<td align="left">T-Griff 10 mm</td> | |||
<td align="left">Gedore Steckschlüssel mit T-Griff 6-kant 10 mm</td> | |||
</tr> | |||
<tr> | |||
<td align="left">T-Griff 13 mm</td> | |||
<td align="left">Gedore Steckschlüssel mit T-Griff 6-kant 13 mm</td> | |||
</tr> | |||
</table> | |||
==== 1/4 Zoll Stechschlüssel ==== | |||
<table border="1" cellspacing="2" cellpadding="4"> | |||
<tr> | |||
<td width="300" align="left">Bezeichnung</td> | |||
<td width="500" align="left">Referenz</td> | |||
</tr> | |||
<tr> <td align="left">Ratsche 1/4 Zoll Antrieb</td> <td align="left"> </td> </tr> | |||
<tr> <td align="left">6 mm Nuss</td> <td align="left"> </td> </tr> | |||
<tr> <td align="left">8 mm Nuss</td> <td align="left"> </td> </tr> | |||
<tr> <td align="left">10 mm Nuss</td> <td align="left"> </td> </tr> | |||
<tr> <td align="left">13 mm Nuss</td> <td align="left"> </td> </tr> | |||
<tr> <td align="left">kleine Verlängerung</td> <td align="left"> </td> </tr> | |||
<tr> <td align="left">große Verlängerung</td> <td align="left"> </td> </tr> | |||
</table> | |||
==== 1/2 Zoll Stechschlüssel ==== | |||
<table border="1" cellspacing="2" cellpadding="4"> | |||
<tr> | |||
<td width="300" align="left">Bezeichnung</td> | |||
<td width="500" align="left">Referenz</td> | |||
</tr> | |||
<tr> <td align="left">Ratsche 1/4 Zoll Antrieb</td> <td align="left"> </td> </tr> | |||
<tr> <td align="left">13 mm Nuss</td> <td align="left"> </td> </tr> | |||
<tr> <td align="left">16 mm Nuss</td> <td align="left"> </td> </tr> | |||
<tr> <td align="left">17 mm Nuss</td> <td align="left"> </td> </tr> | |||
<tr> <td align="left">18 mm Nuss</td> <td align="left"> </td> </tr> | |||
<tr> <td align="left">19 mm Nuss</td> <td align="left"> </td> </tr> | |||
<tr> <td align="left">kleine Verlängerung</td> <td align="left"> </td> </tr> | |||
<tr> <td align="left">große Verlängerung</td> <td align="left"> </td> </tr> | |||
</table> | |||
==== Sonstiges ==== | |||
<table border="1" cellspacing="2" cellpadding="4"> | |||
<tr> | |||
<td width="300" align="left">Bezeichnung</td> | |||
<td width="500" align="left">Referenz</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Hammer</td> | |||
<td align="left">Peddinghaus 5135030030 Rückschlagfr. Schonhammer Hickory 30mm</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Metallsäge klein</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">Holzsäge klein</td> | |||
<td align="left"> </td> | |||
</tr> | |||
</table> | |||
==== Ersatzteile/Kleinteile ==== | |||
<table border="1" cellspacing="2" cellpadding="4"> | |||
<tr> | |||
<td width="300" align="left">Bezeichnung</td> | |||
<td width="500" align="left">Komentar</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Sicherungen</td> | |||
<td align="left">Sicherungskasten mit Flachsicherungen</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Lampensatz</td> | |||
<td align="left">H1, H4, H7 je nach verbauter Lampe</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Lüsterklemmen</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">Universal Schlauchschellen</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">Unterdruckschlauch 3 mm</td> | |||
<td align="left">3 Meter</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Sekundenkleber</td> | |||
<td align="left">Geel</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Einwegfeuerzeug</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">Gelenkfettbeutel</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">Manschettenreperatursatz</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">Spannbänder</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">Zündspule</td> | |||
<td align="left">Fahrzeugspezifisch </td> | |||
</tr> | |||
<tr> | |||
<td align="left">Berge/Abschleppseil</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">Lappen, Handtuch</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">Sägeblätter</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">CO Patronen</td> | |||
<td align="left">Reifenfüllkit</td> | |||
</tr> | |||
</table> | |||
=== Werkzeugsatz Ultra === | |||
z.B. Basteltreffen, Forumshilfe beim Schrauben | |||
==== Rad, Reifen ==== | |||
Spezial | <table border="1" cellspacing="2" cellpadding="4"> | ||
<tr> | |||
<td width="300" align="left">Bezeichnung</td> | |||
<td width="500" align="left">Referenz</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Gelenk-Drehgriff 1/2 Zoll</td> | |||
<td align="left">Famex 10672 Spezial Gelenk-Drehgriff extra lang</td> | |||
</tr> | |||
<tr> | |||
<td align="left">19er 1/2 Zoll Nuss lang</td> | |||
<td align="left">KS Tools 515.1115, Hazet 19er Schlagschrauber Nuss für Alufelgen</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Montierhebel</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">Stopfset</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">12V Kompressor</td> | |||
<td align="left"> </td> | |||
</tr> | |||
</table> | |||
==== Ring-Maulschlüssel ==== | |||
Crimpkontakte | <table border="1" cellspacing="2" cellpadding="4"> | ||
Kabelschutzrohr | <tr> | ||
Elektrotape für Kabelbäume | <td width="300" align="left">Bezeichnung</td> | ||
<td width="500" align="left">Referenz</td> | |||
Reinigungstücher | </tr> | ||
Handschuhe | <tr> | ||
Decke | <td align="left">7 mm gerade</td> | ||
<td align="left">Hazet 600N-7</td> | |||
</tr> | |||
<tr> | |||
<td align="left">8 mm gerade</td> | |||
<td align="left">Hazet 600N-8</td> | |||
</tr> | |||
<tr> | |||
<td align="left">10 mm gerade</td> | |||
<td align="left">Hazet 600N-10</td> | |||
</tr> | |||
<tr> | |||
<td align="left">13 mm gerade</td> | |||
<td align="left">Hazet 600N-13</td> | |||
</tr> | |||
<tr> | |||
<td align="left">13 mm gekröpft</td> | |||
<td align="left">Hazet 603N-13</td> | |||
</tr> | |||
<tr> | |||
<td align="left">15 mm gerade</td> | |||
<td align="left">Hazet 600N-15</td> | |||
</tr> | |||
<tr> | |||
<td align="left">16 mm gerade</td> | |||
<td align="left">Hazet 600N-16</td> | |||
</tr> | |||
<tr> | |||
<td align="left">17 mm gerade</td> | |||
<td align="left">Hazet 600N-17</td> | |||
</tr> | |||
<tr> | |||
<td align="left">18 mm gerade</td> | |||
<td align="left">Hazet 600N-18</td> | |||
</tr> | |||
<tr> | |||
<td align="left">19 mm gerade</td> | |||
<td align="left">Hazet 600N-19</td> | |||
</tr> | |||
</table> | |||
==== Gabelschlüssel ==== | |||
<table border="1" cellspacing="2" cellpadding="4"> | |||
<tr> | |||
<td width="300" align="left">Bezeichnung</td> | |||
<td width="500" align="left">Referenz</td> | |||
</tr> | |||
<tr> | |||
<td align="left">22 mm / 24 mm</td> | |||
<td align="left">GEDORE Doppelmaulschlüssel 22x24 mm DIN 3110</td> | |||
</tr> | |||
</table> | |||
==== Ringschlüssel ==== | |||
<table border="1" cellspacing="2" cellpadding="4"> | |||
<tr> | |||
<td width="300" align="left">Bezeichnung</td> | |||
<td width="500" align="left">Referenz</td> | |||
</tr> | |||
<tr> | |||
<td align="left">16 mm / 17 mm</td> | |||
<td align="left">HAZET 630-16X17, Doppel-Ringschlüssel, tief gekröpft</td> | |||
</tr> | |||
</table> | |||
==== Schraubendreher ==== | |||
<table border="1" cellspacing="2" cellpadding="4"> | |||
<tr> | |||
<td width="300" align="left">Bezeichnung</td> | |||
<td width="500" align="left">Referenz</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Kreuzschlitz kurz</td> | |||
<td align="left">Hazet 801K-PH2</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Kreuzschlitz lang</td> | |||
<td align="left">Hazet 802-PH2</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Kreuzschlitz Gr. 4</td> | |||
<td align="left">Gedore 2160SK PH 4 3K-Schraubendreher</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Schlitz klein</td> | |||
<td align="left">Hazet 810SPC 0.5 x 3.0</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Schlitz groß</td> | |||
<td align="left">Hazet 801U-55</td> | |||
</tr> | |||
</table> | |||
==== Zangen ==== | |||
<table border="1" cellspacing="2" cellpadding="4"> | |||
<tr> | |||
<td width="300" align="left">Bezeichnung</td> | |||
<td width="500" align="left">Referenz</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Kombizange</td> | |||
<td align="left">Knipex 03 02 180</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Spitzzange</td> | |||
<td align="left">Knipex 25 02 160</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Wasserpumpenzange</td> | |||
<td align="left">Knipex Cobra 87 02 250</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Seitenschneider</td> | |||
<td align="left">Knipex 70 02 180</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Kneifzange</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">Schlauchschellenzange</td> | |||
<td align="left">Hazet 798-3</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Crimpzange</td> | |||
<td align="left">Hazet 4656-1 oder Knipex 97 52 36 PreciForce</td> | |||
</tr> | |||
</table> | |||
==== Elektrik ==== | |||
<table border="1" cellspacing="2" cellpadding="4"> | |||
<tr> | |||
<td width="300" align="left">Bezeichnung</td> | |||
<td width="500" align="left">Referenz</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Taschenlampe</td> | |||
<td align="left">LED Lampe</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Prüflampe</td> | |||
<td align="left">Hazet 2153 Autolicht-Prüfer</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Isolierband</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">Kabelbinder klein</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">Kabelbinder groß</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">Multimeter</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">Schrumpfschlauch</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">Crimpkontakte</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">Kabelschutzrohr</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">Elektrotape für Kabelbäume</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">Gaslötkolben</td> | |||
<td align="left"> </td> | |||
</tr> | |||
</table> | |||
==== Innensechskant ==== | |||
<table border="1" cellspacing="2" cellpadding="4"> | |||
<tr> | |||
<td width="300" align="left">Bezeichnung</td> | |||
<td width="500" align="left">Referenz</td> | |||
</tr> | |||
<tr> | |||
<td align="left">5 mm, lang</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">6 mm, lang</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">7 mm, lang</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">8 mm, lang</td> | |||
<td align="left"> </td> | |||
</tr> | |||
</table> | |||
oder als Satz wie GEDORE Winkelschraubendreher Satz H 42 KEL-88 ) | |||
==== Innenvielzahn ==== | |||
<table border="1" cellspacing="2" cellpadding="4"> | |||
<tr> | |||
<td width="300" align="left">Bezeichnung</td> | |||
<td width="500" align="left">Referenz</td> | |||
</tr> | |||
<tr> | |||
<td align="left">8 mm</td> | |||
<td align="left">Gedore Winkelschraubendreher Innenvielzahn XZN M 8</td> | |||
</tr> | |||
<tr> | |||
<td align="left">10 mm</td> | |||
<td align="left">Gedore Winkelschraubendreher Innenvielzahn XZN M 10</td> | |||
</tr> | |||
<tr> | |||
<td align="left">12 mm</td> | |||
<td align="left">Gedore Winkelschraubendreher Innenvielzahn XZN M 12</td> | |||
</tr> | |||
</table> | |||
==== T-Griff Steckschlüssel ==== | |||
<table border="1" cellspacing="2" cellpadding="4"> | |||
<tr> | |||
<td width="300" align="left">Bezeichnung</td> | |||
<td width="500" align="left">Referenze</td> | |||
</tr> | |||
<tr> | |||
<td align="left">T-Griff 6 mm</td> | |||
<td align="left">Gedore Steckschlüssel mit T-Griff 6-kant 6 mm</td> | |||
</tr> | |||
<tr> | |||
<td align="left">T-Griff 7 mm</td> | |||
<td align="left">Gedore Steckschlüssel mit T-Griff 6-kant 7 mm</td> | |||
</tr> | |||
<tr> | |||
<td align="left">T-Griff 8 mm</td> | |||
<td align="left">Gedore Steckschlüssel mit T-Griff 6-kant 8 mm</td> | |||
</tr> | |||
<tr> | |||
<td align="left">T-Griff 10 mm</td> | |||
<td align="left">Gedore Steckschlüssel mit T-Griff 6-kant 10 mm</td> | |||
</tr> | |||
<tr> | |||
<td align="left">T-Griff 13 mm</td> | |||
<td align="left">Gedore Steckschlüssel mit T-Griff 6-kant 13 mm</td> | |||
</tr> | |||
</table> | |||
==== 1/4 Zoll Stechschlüssel ==== | |||
<table border="1" cellspacing="2" cellpadding="4"> | |||
<tr> | |||
<td width="300" align="left">Bezeichnung</td> | |||
<td width="500" align="left">Referenz</td> | |||
</tr> | |||
<tr> <td align="left">Ratsche 1/4 Zoll Antrieb</td> <td align="left"> </td> </tr> | |||
<tr> <td align="left">6 mm Nuss</td> <td align="left"> </td> </tr> | |||
<tr> <td align="left">8 mm Nuss</td> <td align="left"> </td> </tr> | |||
<tr> <td align="left">10 mm Nuss</td> <td align="left"> </td> </tr> | |||
<tr> <td align="left">13 mm Nuss</td> <td align="left"> </td> </tr> | |||
<tr> <td align="left">kleine Verlängerung</td> <td align="left"> </td> </tr> | |||
<tr> <td align="left">große Verlängerung</td> <td align="left"> </td> </tr> | |||
</table> | |||
==== 1/2 Zoll Stechschlüssel ==== | |||
<table border="1" cellspacing="2" cellpadding="4"> | |||
<tr> | |||
<td width="300" align="left">Bezeichnung</td> | |||
<td width="500" align="left">Referenz</td> | |||
</tr> | |||
<tr> <td align="left">Ratsche 1/4 Zoll Antrieb</td> <td align="left"> </td> </tr> | |||
<tr> <td align="left">13 mm Nuss</td> <td align="left"> </td> </tr> | |||
<tr> <td align="left">16 mm Nuss</td> <td align="left"> </td> </tr> | |||
<tr> <td align="left">17 mm Nuss</td> <td align="left"> </td> </tr> | |||
<tr> <td align="left">18 mm Nuss</td> <td align="left"> </td> </tr> | |||
<tr> <td align="left">19 mm Nuss</td> <td align="left"> </td> </tr> | |||
<tr> <td align="left">kleine Verlängerung</td> <td align="left"> </td> </tr> | |||
<tr> <td align="left">große Verlängerung</td> <td align="left"> </td> </tr> | |||
</table> | |||
==== Drehmomentschlüssel ==== | |||
<table border="1" cellspacing="2" cellpadding="4"> | |||
<tr> | |||
<td width="300" align="left">Bezeichnung</td> | |||
<td width="500" align="left">Referenz</td> | |||
</tr> | |||
<tr> <td align="left">1/4 Zoll Antrieb, 6 - 30 Nm</td> <td align="left">Proxon Micro Click</td> </tr> | |||
<tr> <td align="left">1/2 Zoll Antrieb, 10 - 60 Nm</td> <td align="left">HAZET Drehmomentschlüssel 5110-2CT 10 - 60 Nm</td> </tr> | |||
<tr> <td align="left">1/2 Zoll Antrieb, 60 - 320 Nm</td> <td align="left">HAZET Drehmomentschlüssel 5123-2CT, 60 bis 320 Nm</td> </tr> | |||
</table> | |||
==== Sonstiges ==== | |||
<table border="1" cellspacing="2" cellpadding="4"> | |||
<tr> | |||
<td width="300" align="left">Bezeichnung</td> | |||
<td width="500" align="left">Referenz</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Hammer</td> | |||
<td align="left">Peddinghaus 5135030030 Rückschlagfr. Schonhammer Hickory 30mm</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Metallsäge klein</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">Holzsäge klein</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">Bit Halter</td> | |||
<td align="left">mit Bitsatz</td> | |||
</tr> | |||
<tr> | |||
<td align="left">OBD</td> | |||
<td align="left">USB OBD Adapter, VCDS lite/pro, Notebook</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Schraubstock</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">Rangierwagenheber</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">Unterstellböcke</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">Bremsenrücksteller</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">Trichter</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">Faltschüssel</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">Stirnlampe</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">Starthilfekabel</td> | |||
<td align="left"> </td> | |||
</tr> | |||
</table> | |||
==== Ersatzteile/Kleinteile ==== | |||
<table border="1" cellspacing="2" cellpadding="4"> | |||
<tr> | |||
<td width="300" align="left">Bezeichnung</td> | |||
<td width="500" align="left">Komentar</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Sicherungen</td> | |||
<td align="left">Sicherungskasten mit Flachsicherungen</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Lampensatz</td> | |||
<td align="left">H1, H4, H7 je nach verbauter Lampe</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Lüsterklemmen</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">Universal Schlauchschellen</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">Unterdruckschlauch 3 mm</td> | |||
<td align="left">3 Meter</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Sekundenkleber</td> | |||
<td align="left">Geel</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Einwegfeuerzeug</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">Gelenkfettbeutel</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">Manschettenreperatursatz</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">Spannbänder</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">Zündspule</td> | |||
<td align="left">Fahrzeugspezifisch </td> | |||
</tr> | |||
<tr> | |||
<td align="left">Berge/Abschleppseil</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">Lappen, Handtuch</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">Sägeblätter</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">CO Patronen</td> | |||
<td align="left">Reifenfüllkit</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Gaskartusche</td> | |||
<td align="left">für Gaslötkolben </td> | |||
</tr> | |||
<tr> | |||
<td align="left">Hanbdwaschpaste</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">Reinigungstücher</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">ZAS</td> | |||
<td align="left"> </td> | |||
</tr> | |||
<tr> | |||
<td align="left">Relais 109</td> | |||
<td align="left">je nach Fahrzeug</td> | |||
</tr> | |||
<tr> | |||
<td align="left">Blinkrelais</td> | |||
<td align="left"> </td> | |||
</tr> | |||
</table> | |||
==== Kleidung ==== | |||
<table border="1" cellspacing="2" cellpadding="4"> | |||
<tr> | |||
<td width="300" align="left">Bezeichnung</td> | |||
<td width="500" align="left">Referenz</td> | |||
</tr> | |||
<tr> <td align="left">Handschuhe</td> <td align="left"> </td> </tr> | |||
<tr> <td align="left">Regenjacke, Hose</td> <td align="left"> </td> </tr> | |||
<tr> <td align="left">Decke</td> <td align="left"> </td> </tr> | |||
<tr> <td align="left">Latexhandschuhe</td> <td align="left"> </td> </tr> | |||
</table> | |||
[[Kategorie:Sonstiges]] | [[Kategorie:Sonstiges]] | ||
Aktuelle Version vom 6. Oktober 2013, 14:11 Uhr
Werkzeug für unterwegs (B.Rude)
je nach Können und Ambition hat man mehr oder weniger Werkzeug im Bus. Hier nun eine Übersicht und eine Unterteilung in Werkzeugsätze.
Größen
- 7 mm - Verschraubung M4
- 8 mm - Verschraubung M5
- 10 mm - Verschraubung M6
- 13 mm - Verschraubung M8
- 15 mm - Achsmuttern an Fahrrädern
- 16 mm - Verschraubung M10
- 17 mm (alte Norm für M10)
- 18 mm - Verschraubung M12
- 19 mm (alte Norm für M12)
- 22 mm - Verschraubung M14
- 24 mm - Verschraubung M16
- 27 mm - Verschraubung M18
Werkzeugsatz Basic
Dieser Werkzeugsatz soll alle kleineren Reparaturen z.B. während eines Campingurlaubes ermöglichen.
Rad, Reifen
| Bezeichnung | Referenz |
| Gelenk-Drehgriff 1/2 Zoll | Famex 10672 Spezial Gelenk-Drehgriff extra lang |
| 19er 1/2 Zoll Nuss lang | KS Tools 515.1115, Hazet 19er Schlagschrauber Nuss für Alufelgen |
Ring-Maulschlüssel
| Bezeichnung | Referenz |
| 7 mm gerade | Hazet 600N-7 |
| 8 mm gerade | Hazet 600N-8 |
| 10 mm gerade | Hazet 600N-10 |
| 13 mm gerade | Hazet 600N-13 |
| 13 mm gekröpft | Hazet 603N-13 |
| 15 mm gerade | Hazet 600N-15 |
| 16 mm gerade | Hazet 600N-16 |
| 17 mm gerade | Hazet 600N-17 |
| 18 mm gerade | Hazet 600N-18 |
| 19 mm gerade | Hazet 600N-19 |
Gabelschlüssel
| Bezeichnung | Referenz |
| 22 mm / 24 mm | GEDORE Doppelmaulschlüssel 22x24 mm DIN 3110 |
Schraubendreher
| Bezeichnung | Referenz |
| Kreuzschlitz kurz | Hazet 801K-PH2 |
| Kreuzschlitz lang | Hazet 802-PH2 |
| Kreuzschlitz Gr. 4 | Gedore 2160SK PH 4 3K-Schraubendreher |
| Schlitz klein | Hazet 810SPC 0.5 x 3.0 |
| Schlitz groß | Hazet 801U-55 |
Zangen
| Bezeichnung | Referenz |
| Kombizange | Knipex 03 02 180 |
| Spitzzange | Knipex 25 02 160 |
| Wasserpumpenzange | Knipex Cobra 87 02 250 |
| Seitenschneider | Knipex 70 02 180 |
Elektrik:
| Bezeichnung | Referenz |
| Taschenlampe | LED Lampe |
| Prüflampe | Hazet 2153 Autolicht-Prüfer |
| Isolierband | |
| Kabelbinder klein | |
| Kabelbinder groß |
Innensechskant
| Bezeichnung | Referenz |
| 5 mm, lang | |
| 6 mm, lang | |
| 7 mm, lang | |
| 8 mm, lang |
oder als Satz wie GEDORE Winkelschraubendreher Satz H 42 KEL-88 )
Innenvielzahn
| Bezeichnung | Referenz |
| 8 mm | Gedore Winkelschraubendreher Innenvielzahn XZN M 8 |
| 10 mm | Gedore Winkelschraubendreher Innenvielzahn XZN M 10 |
| 12 mm | Gedore Winkelschraubendreher Innenvielzahn XZN M 12 |
T-Griff Steckschlüssel
| Bezeichnung | Referenze |
| T-Griff 10 mm | Gedore Steckschlüssel mit T-Griff 6-kant 10 mm |
| T-Griff 13 mm | Gedore Steckschlüssel mit T-Griff 6-kant 13 mm |
Sonstiges
| Bezeichnung | Referenz |
| Hammer | Peddinghaus 5135030030 Rückschlagfr. Schonhammer Hickory 30mm |
Ersatzteile/Kleinteile
| Bezeichnung | Komentar |
| Sicherungen | Sicherungskasten mit Flachsicherungen |
| Lampensatz | H1, H4, H7 je nach verbauter Lampe |
| Lüsterklemmen | |
| Universal Schlauchschellen | |
| Unterdruckschlauch 3 mm | 3 Meter |
| Sekundenkleber | Geel |
| Einwegfeuerzeug |
Werkzeugsatz Enhanced
z.B. Offroad Tour, langer Campingurlaub
Rad, Reifen
| Bezeichnung | Referenz |
| Gelenk-Drehgriff 1/2 Zoll | Famex 10672 Spezial Gelenk-Drehgriff extra lang |
| 19er 1/2 Zoll Nuss lang | KS Tools 515.1115, Hazet 19er Schlagschrauber Nuss für Alufelgen |
| Montierhebel |
Ring-Maulschlüssel
| Bezeichnung | Referenz |
| 7 mm gerade | Hazet 600N-7 |
| 8 mm gerade | Hazet 600N-8 |
| 10 mm gerade | Hazet 600N-10 |
| 13 mm gerade | Hazet 600N-13 |
| 13 mm gekröpft | Hazet 603N-13 |
| 15 mm gerade | Hazet 600N-15 |
| 16 mm gerade | Hazet 600N-16 |
| 17 mm gerade | Hazet 600N-17 |
| 18 mm gerade | Hazet 600N-18 |
| 19 mm gerade | Hazet 600N-19 |
Gabelschlüssel
| Bezeichnung | Referenz |
| 22 mm / 24 mm | GEDORE Doppelmaulschlüssel 22x24 mm DIN 3110 |
Schraubendreher
| Bezeichnung | Referenz |
| Kreuzschlitz kurz | Hazet 801K-PH2 |
| Kreuzschlitz lang | Hazet 802-PH2 |
| Kreuzschlitz Gr. 4 | Gedore 2160SK PH 4 3K-Schraubendreher |
| Schlitz klein | Hazet 810SPC 0.5 x 3.0 |
| Schlitz groß | Hazet 801U-55 |
Zangen
| Bezeichnung | Referenz |
| Kombizange | Knipex 03 02 180 |
| Spitzzange | Knipex 25 02 160 |
| Wasserpumpenzange | Knipex Cobra 87 02 250 |
| Seitenschneider | Knipex 70 02 180 |
| Kneifzange |
Elektrik
| Bezeichnung | Referenz |
| Taschenlampe | LED Lampe |
| Prüflampe | Hazet 2153 Autolicht-Prüfer |
| Isolierband | |
| Kabelbinder klein | |
| Kabelbinder groß | |
| Multimeter | |
| Schrumpfschlauch |
Innensechskant
| Bezeichnung | Referenz |
| 5 mm, lang | |
| 6 mm, lang | |
| 7 mm, lang | |
| 8 mm, lang |
oder als Satz wie GEDORE Winkelschraubendreher Satz H 42 KEL-88 )
Innenvielzahn
| Bezeichnung | Referenz |
| 8 mm | Gedore Winkelschraubendreher Innenvielzahn XZN M 8 |
| 10 mm | Gedore Winkelschraubendreher Innenvielzahn XZN M 10 |
| 12 mm | Gedore Winkelschraubendreher Innenvielzahn XZN M 12 |
T-Griff Steckschlüssel
| Bezeichnung | Referenze |
| T-Griff 6 mm | Gedore Steckschlüssel mit T-Griff 6-kant 6 mm |
| T-Griff 7 mm | Gedore Steckschlüssel mit T-Griff 6-kant 7 mm |
| T-Griff 8 mm | Gedore Steckschlüssel mit T-Griff 6-kant 8 mm |
| T-Griff 10 mm | Gedore Steckschlüssel mit T-Griff 6-kant 10 mm |
| T-Griff 13 mm | Gedore Steckschlüssel mit T-Griff 6-kant 13 mm |
1/4 Zoll Stechschlüssel
| Bezeichnung | Referenz |
| Ratsche 1/4 Zoll Antrieb | |
| 6 mm Nuss | |
| 8 mm Nuss | |
| 10 mm Nuss | |
| 13 mm Nuss | |
| kleine Verlängerung | |
| große Verlängerung |
1/2 Zoll Stechschlüssel
| Bezeichnung | Referenz |
| Ratsche 1/4 Zoll Antrieb | |
| 13 mm Nuss | |
| 16 mm Nuss | |
| 17 mm Nuss | |
| 18 mm Nuss | |
| 19 mm Nuss | |
| kleine Verlängerung | |
| große Verlängerung |
Sonstiges
| Bezeichnung | Referenz |
| Hammer | Peddinghaus 5135030030 Rückschlagfr. Schonhammer Hickory 30mm |
| Metallsäge klein | |
| Holzsäge klein |
Ersatzteile/Kleinteile
| Bezeichnung | Komentar |
| Sicherungen | Sicherungskasten mit Flachsicherungen |
| Lampensatz | H1, H4, H7 je nach verbauter Lampe |
| Lüsterklemmen | |
| Universal Schlauchschellen | |
| Unterdruckschlauch 3 mm | 3 Meter |
| Sekundenkleber | Geel |
| Einwegfeuerzeug | |
| Gelenkfettbeutel | |
| Manschettenreperatursatz | |
| Spannbänder | |
| Zündspule | Fahrzeugspezifisch |
| Berge/Abschleppseil | |
| Lappen, Handtuch | |
| Sägeblätter | |
| CO Patronen | Reifenfüllkit |
Werkzeugsatz Ultra
z.B. Basteltreffen, Forumshilfe beim Schrauben
Rad, Reifen
| Bezeichnung | Referenz |
| Gelenk-Drehgriff 1/2 Zoll | Famex 10672 Spezial Gelenk-Drehgriff extra lang |
| 19er 1/2 Zoll Nuss lang | KS Tools 515.1115, Hazet 19er Schlagschrauber Nuss für Alufelgen |
| Montierhebel | |
| Stopfset | |
| 12V Kompressor |
Ring-Maulschlüssel
| Bezeichnung | Referenz |
| 7 mm gerade | Hazet 600N-7 |
| 8 mm gerade | Hazet 600N-8 |
| 10 mm gerade | Hazet 600N-10 |
| 13 mm gerade | Hazet 600N-13 |
| 13 mm gekröpft | Hazet 603N-13 |
| 15 mm gerade | Hazet 600N-15 |
| 16 mm gerade | Hazet 600N-16 |
| 17 mm gerade | Hazet 600N-17 |
| 18 mm gerade | Hazet 600N-18 |
| 19 mm gerade | Hazet 600N-19 |
Gabelschlüssel
| Bezeichnung | Referenz |
| 22 mm / 24 mm | GEDORE Doppelmaulschlüssel 22x24 mm DIN 3110 |
Ringschlüssel
| Bezeichnung | Referenz |
| 16 mm / 17 mm | HAZET 630-16X17, Doppel-Ringschlüssel, tief gekröpft |
Schraubendreher
| Bezeichnung | Referenz |
| Kreuzschlitz kurz | Hazet 801K-PH2 |
| Kreuzschlitz lang | Hazet 802-PH2 |
| Kreuzschlitz Gr. 4 | Gedore 2160SK PH 4 3K-Schraubendreher |
| Schlitz klein | Hazet 810SPC 0.5 x 3.0 |
| Schlitz groß | Hazet 801U-55 |
Zangen
| Bezeichnung | Referenz |
| Kombizange | Knipex 03 02 180 |
| Spitzzange | Knipex 25 02 160 |
| Wasserpumpenzange | Knipex Cobra 87 02 250 |
| Seitenschneider | Knipex 70 02 180 |
| Kneifzange | |
| Schlauchschellenzange | Hazet 798-3 |
| Crimpzange | Hazet 4656-1 oder Knipex 97 52 36 PreciForce |
Elektrik
| Bezeichnung | Referenz |
| Taschenlampe | LED Lampe |
| Prüflampe | Hazet 2153 Autolicht-Prüfer |
| Isolierband | |
| Kabelbinder klein | |
| Kabelbinder groß | |
| Multimeter | |
| Schrumpfschlauch | |
| Crimpkontakte | |
| Kabelschutzrohr | |
| Elektrotape für Kabelbäume | |
| Gaslötkolben |
Innensechskant
| Bezeichnung | Referenz |
| 5 mm, lang | |
| 6 mm, lang | |
| 7 mm, lang | |
| 8 mm, lang |
oder als Satz wie GEDORE Winkelschraubendreher Satz H 42 KEL-88 )
Innenvielzahn
| Bezeichnung | Referenz |
| 8 mm | Gedore Winkelschraubendreher Innenvielzahn XZN M 8 |
| 10 mm | Gedore Winkelschraubendreher Innenvielzahn XZN M 10 |
| 12 mm | Gedore Winkelschraubendreher Innenvielzahn XZN M 12 |
T-Griff Steckschlüssel
| Bezeichnung | Referenze |
| T-Griff 6 mm | Gedore Steckschlüssel mit T-Griff 6-kant 6 mm |
| T-Griff 7 mm | Gedore Steckschlüssel mit T-Griff 6-kant 7 mm |
| T-Griff 8 mm | Gedore Steckschlüssel mit T-Griff 6-kant 8 mm |
| T-Griff 10 mm | Gedore Steckschlüssel mit T-Griff 6-kant 10 mm |
| T-Griff 13 mm | Gedore Steckschlüssel mit T-Griff 6-kant 13 mm |
1/4 Zoll Stechschlüssel
| Bezeichnung | Referenz |
| Ratsche 1/4 Zoll Antrieb | |
| 6 mm Nuss | |
| 8 mm Nuss | |
| 10 mm Nuss | |
| 13 mm Nuss | |
| kleine Verlängerung | |
| große Verlängerung |
1/2 Zoll Stechschlüssel
| Bezeichnung | Referenz |
| Ratsche 1/4 Zoll Antrieb | |
| 13 mm Nuss | |
| 16 mm Nuss | |
| 17 mm Nuss | |
| 18 mm Nuss | |
| 19 mm Nuss | |
| kleine Verlängerung | |
| große Verlängerung |
Drehmomentschlüssel
| Bezeichnung | Referenz |
| 1/4 Zoll Antrieb, 6 - 30 Nm | Proxon Micro Click |
| 1/2 Zoll Antrieb, 10 - 60 Nm | HAZET Drehmomentschlüssel 5110-2CT 10 - 60 Nm |
| 1/2 Zoll Antrieb, 60 - 320 Nm | HAZET Drehmomentschlüssel 5123-2CT, 60 bis 320 Nm |
Sonstiges
| Bezeichnung | Referenz |
| Hammer | Peddinghaus 5135030030 Rückschlagfr. Schonhammer Hickory 30mm |
| Metallsäge klein | |
| Holzsäge klein | |
| Bit Halter | mit Bitsatz |
| OBD | USB OBD Adapter, VCDS lite/pro, Notebook |
| Schraubstock | |
| Rangierwagenheber | |
| Unterstellböcke | |
| Bremsenrücksteller | |
| Trichter | |
| Faltschüssel | |
| Stirnlampe | |
| Starthilfekabel |
Ersatzteile/Kleinteile
| Bezeichnung | Komentar |
| Sicherungen | Sicherungskasten mit Flachsicherungen |
| Lampensatz | H1, H4, H7 je nach verbauter Lampe |
| Lüsterklemmen | |
| Universal Schlauchschellen | |
| Unterdruckschlauch 3 mm | 3 Meter |
| Sekundenkleber | Geel |
| Einwegfeuerzeug | |
| Gelenkfettbeutel | |
| Manschettenreperatursatz | |
| Spannbänder | |
| Zündspule | Fahrzeugspezifisch |
| Berge/Abschleppseil | |
| Lappen, Handtuch | |
| Sägeblätter | |
| CO Patronen | Reifenfüllkit |
| Gaskartusche | für Gaslötkolben |
| Hanbdwaschpaste | |
| Reinigungstücher | |
| ZAS | |
| Relais 109 | je nach Fahrzeug |
| Blinkrelais |
Kleidung
| Bezeichnung | Referenz |
| Handschuhe | |
| Regenjacke, Hose | |
| Decke | |
| Latexhandschuhe |
